EnviroTex Lite

EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use. The original 1:1 epoxy coating system since 1969 Convenient 1:1 mix ratio by volume 20-30 minute working time / 8-12 hour tack-free time Full cure in 72 hours FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured.  Self-levels to approximately 1/16" Produces a durable high-gloss surface coating for artwork, table

EnviroTex%20Lite%20is%20thick%2C%20high%20gloss%2C%20pour-on%20epoxy%20coating.%20Imagine%20a%20Bar%20top%2C%20and%20you%20can%20imagine%20the%20type%

EnviroTex Lite Pour-On High Gloss Resin

ETI Envirotex Lite Pour-on Product Overview

Epoxy resin Envirotex lite. Wobbler test

® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8

EnviroTex Lite

Envirotex Lite Epoxy Resin

EnviroTex Lite Pour-On High Gloss Finish Kit, 8 oz

How to Use Enviro-Tex Lite : Pour On High Gloss Finish

Open Box Envirotex Lite 02008 Pour-On High Gloss Finish 8 fl oz Craft

Envirotex Lite Pour-On High Gloss Finish, Hobby Lobby

Using EnviroTex Lite Resin For Jewelry Making - HubPages

Envirotex Lite®, Gallon kit, Pour On High Gloss Finish, (1/2 gallon resin, 1/2 gallon Hardener.) Item # 02128 $74.49 , Gallon Kit: Coverage: 32 square

Envirotex Lite Gallon Kit 02128