BOLT-ON QD mounts and Quick Detach and Release Swivel Sets - MUTINY

Por um escritor misterioso

Last updated 30 dezembro 2024

BOLT-ON QD mounts and Quick Detach and Release Swivel Sets - MUTINY

BOLT-ON QD mounts and Quick Detach and Release Swivel Sets QD sling swivel set (comes with 2) with a push button to quickly detach - MUTINY
BOLT-ON QD mounts and Quick Detach and Release Swivel Sets We now offer the QD mounts in two types: Type 1: QD/S red anodized. S = Standard. Made for 1 on center holes like Bright Tangerine, RED, Arri, etc. Use a ruler to determine the hole spacing where you want to mount these. It should be 1 from the center of one hole to the center of the other hole. Type 2: QD/NS black anodized . NS = Non-Standard. Made for holes that are between 20mm (under is okay) on center holes like Tilta, SmallRig, Nitze, and other brands. Use a ruler to determine the hole spacing of where you want to mount these. If it's 20mm or under this is the QD you want. There is an optional kit for GDU Atlas handle owners that allows you to mount these via the M4 holes on the handles. Description: QD sling swivel set (comes with 2) with a push button to quickly detach and attach your camera strap with confidence. QD's are rated at a load weight of over 100lbs each so they can easily handle your camera build or rigging needs. QD attachments have been used by still photography camera plates for years as a quick and solid way to add or remove a camera strap as well as for rigging a camera with rope or cable. Each set of mounts comes with 4x 1/4-20 mounting screws. An optional M4 screw kit for GDU handles is coming soon. 1) 2x BOLT-ON QD mounts with 2x 1 D-Loop swivels. These D-Loops are great for thinner straps or straps that have a smaller connection point or use spit rings. 4x screws included. 2) 2x BOLT-ON QD mounts with 2x 1.25 Wide two-point strap swivels. The 1.25 wide points are better for wider straps or if connecting directly to a strap versus using a clip or split ring. 4x screws included. 3) BOLT-ON QD mounts with no swivels. 4x screws included. 4) D-Loop swivels only with no BOLT-ON QD mounts: 2x 1 D-Loop swivels. These D-Loops are great for thinner straps or straps that have a smaller connection point or use spit rings. 5) 1.25 wide loop swivels only with no BOLT-ON QD mounts: 2x 1.25 Wide two-point strap swivels. The 1.25 wide points are better for wider straps or if connecting directly to a strap versus using a clip or split ring. 6) BUNDLE: Neoprene camera strap with D-Loop QD Swivels with BOLT-ON QD mounts Specifications: Measurements: BOLT-ON QD/S RED mounting plates are 1.4 (37.10mm) long x 0.6 (15.21mm) wide x 0.3 (9.66mm) height with the mounting holes being 1 on center standard. BOLT-ON QD/NS BLACK mounting plates are 1.7 (43.26mm) long x x 0.6 (15.21mm) wide x 0.6 (16.81mm) height with the mounting holes being 20mm on center (non-standard) or less. Weight: 2x BOLT-ON QD mounts with 4x screws weights 0.77oz (22g) These are made to QD standards. BOLT-ON QD mounts are designed and machined in New Hampshire, USA